Step 10 of 14 · Worked example · TEACH

← Geometry & Trigonometry

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Geometry · Step 10

Use the radian formulas directly; no fraction of 360° is needed.

A sector of a circle of radius 9 cm has an angle of 2π/3 radians at the centre. Find the arc length and the area of the sector.

The two radian formulas, and their degree equivalents

QuantityIn radiansIn degrees
Arc lengths = r θs = (θ/360) × 2πr
Sector areaA = ½ r² θA = (θ/360) × πr²
Conversionθ_rad = θ_deg × π/180θ_deg = θ_rad × 180/π
Both radian versions are simpler, which is exactly why radians exist.

A sector of a circle of radius 12 cm has an arc of length 9π cm.

Find the angle at the centre, in radians and in degrees.

Find the area of the sector, exact in terms of π.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A sector is a slice of a circle, cut by two radii. Here each radius is 12 cm and the curved edge is 9π cm long.
  • What do they want first? The angle at the centre, written two ways: in radians and in degrees.
  • Then? The area of the slice, exact in terms of π: leave π in the answer, no rounding.
Céim

Higher Level Maths · Geometry & Trigonometry · Step 10 of 14

Radians, Arcs & Sectors

Radian measure as arc length per unit radius, and the arc-length and sector-area formulas that follow from it.

Why it matters

Radians make the circle formulas simple and are the measure used everywhere in calculus with trigonometric functions.

The worked example

A sector of a circle of radius 12 cm has an arc of length 9π cm. Find the angle at the centre, in radians and in degrees. Find the area of the sector, exact in terms of π.

How the worked example goes

  1. Read

    • What is going on? A sector is a slice of a circle, cut by two radii. Here each radius is 12 cm and the curved edge is 9π cm long.
    • What do they want first? The angle at the centre, written two ways: in radians and in degrees.
    • Then? The area of the slice, exact in terms of π: leave π in the answer, no rounding.
  2. Understand

    • How do I picture it?
    • Two radii of 12 cm from the centre, with the angle θ between them. The arc joins their ends.
    • 9π is about 28.3 cm of arc: more than two radii long, but well short of the whole way round.
  3. Reduce

    • Where do I start?
    • We know l and r, and l = rθ has only θ unknown. So the angle comes first.
    • 9π = 12θ
  4. Solve

    • What is the angle in radians?
    • θ is multiplied by 12. Divide both sides by 12 to undo it.
    • θ = (9π)/(12)
  5. Check

    • Is it right?
    • Put the angle back: l = 12 × 3π/4 = 9π ✓
    • 135° out of a full turn is 135 ÷ 360 = 3/8 of the circle.

Common mistakes to avoid

Key terms

radian · arc length · sector · subtend · π · conversion