Step 6 of 14 · Worked example · TEACH

← Geometry & Trigonometry

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Geometry · Step 6

Follow the moves in order, then say why the arc intersections work.

Construct the perpendicular bisector of a given segment [AB], and explain why the construction produces it.

The points that fix the perpendicular at P

553390°L1ℓCPDQ

Given

  • Line ℓ and the point P on it
  • Arc from P, radius 3: cuts ℓ at C and D
  • Arcs from C and from D, both radius 5: cross at Q

Deduced, with a reason

  • |PC| = |PD| and |QC| = |QD|
  • PQ is the perpendicular bisector of [CD], so PQ ⊥ ℓ at P
|PC| = |PD| because both are radii of one arc, and |QC| = |QD| because the same radius drew both arcs. So P and Q are both on the perpendicular bisector of [CD], and PQ meets ℓ at 90°.

P is a point on a given line ℓ.

Using a compass and straight edge only, construct the line through P perpendicular to ℓ.

Explain why the construction works.

Read it once, slowly. Then copy it onto your page.
  • What is given? A line and a point P sitting on it, not off it. No lengths at all, so the method must work for any line.
  • What tools? Compass and straight edge only. No measuring with a ruler, no protractor. A straight edge only draws lines.
  • What do they want? Two things: the line through P at 90° to ℓ, drawn, and the reason it works, written.
Céim

Higher Level Maths · Geometry & Trigonometry · Step 6 of 14

Geometric Constructions

The prescribed constructions, each worked as purpose, instrument moves, the reason it works, and how to check it.

Why it matters

A construction is examined as a method: the arcs left on the page are the evidence that you constructed rather than measured.

The worked example

P is a point on a given line ℓ. Using a compass and straight edge only, construct the line through P perpendicular to ℓ. Explain why the construction works.

How the worked example goes

  1. Read

    • What is given? A line and a point P sitting on it, not off it. No lengths at all, so the method must work for any line.
    • What tools? Compass and straight edge only. No measuring with a ruler, no protractor. A straight edge only draws lines.
    • What do they want? Two things: the line through P at 90° to ℓ, drawn, and the reason it works, written.
  2. Understand

    • What can a compass do for me?
    • A compass draws every point at one fixed distance from its centre. So it makes equal lengths without measuring.
    • Perpendicular means meeting at 90°. A compass cannot draw an angle. So the 90° must come from equal lengths.
  3. Reduce

    • What are the moves?
    • 1. Centre P, any radius: one arc cutting ℓ at C and D.
    • 2. Open the compass wider. Same radius, centre C then centre D: the arcs cross at Q.
  4. Solve

    • How do I make P a midpoint?
    • Compass point on P, radius 3 cm say
    • One arc cutting ℓ on both sides of P
  5. Check

    • Is it really 90°?
    • Look at triangles QPC and QPD: |PC| = |PD|, |QC| = |QD|, and QP is in both. Three pairs of equal sides: congruent, by SSS.
    • So ∠QPC = ∠QPD. Together they make the straight angle on ℓ: 180° ÷ 2 = 90° ✓

Common mistakes to avoid

Key terms

compass · straight edge · arc · perpendicular bisector · locus · equidistant