Step 7 of 14 · Worked example · TEACH

← Geometry & Trigonometry

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Geometry · Step 7

Apply the correct power of the scale factor to each quantity.

A rectangle of area 12 cm² is enlarged by scale factor 2.5 about a point O. Find the area of the image, and the ratio of the perimeters.

One factor, three different effects

QuantityScales byWith k = 1.4
Length, perimeterk× 1.4
Area, surface areak²× 1.96
Volumek³× 2.744
Only the power changes. This single table prevents the most common enlargement error.

Two similar tins have volumes 250 cm³ and 686 cm³.

(i) Find the ratio of their heights.

(ii) The label on the smaller tin has area 50 cm². Find the area of the matching label on the larger tin.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Similar tins: the same shape, one a scaled-up copy of the other. Every length grows by the same factor.
  • What is given? Two volumes (space inside, cm³) and one label's area (a surface, cm²). No length at all.
  • What do they want? (i) a ratio of heights: lengths. (ii) the larger label's area: a surface.
Céim

Higher Level Maths · Geometry & Trigonometry · Step 7 of 14

Enlargements & Scale Factor

Scale factor k as a ratio of matching lengths, its effect on length, area and volume, and finding k back from an area or volume ratio.

Why it matters

Scale questions punish one specific error: applying k to area when area scales by k².

The worked example

Two similar tins have volumes 250 cm³ and 686 cm³. (i) Find the ratio of their heights. (ii) The label on the smaller tin has area 50 cm². Find the area of the matching label on the larger tin.

How the worked example goes

  1. Read

    • What is going on? Similar tins: the same shape, one a scaled-up copy of the other. Every length grows by the same factor.
    • What is given? Two volumes (space inside, cm³) and one label's area (a surface, cm²). No length at all.
    • What do they want? (i) a ratio of heights: lengths. (ii) the larger label's area: a surface.
  2. Understand

    • (i) How do lengths, areas and volumes grow?
    • Real numbers first. Double every edge of a 1 cm cube, so the edge is 2 cm.
    • Edge: 1 → 2 (× 2)
  3. Reduce

    • How does the height ratio come from the volume ratio? Cube root of each side: Volumes grow by k³, so a cube root gets back to k, the length factor.
    • (i) Where do I start?
    • Cube roots of 250 and 686 are not whole numbers. Simplify the ratio first: both are even.
  4. Solve

    • (i) Simplify, then cube root.
    • 250 : 686
    • = 125 : 343 (÷ 2)
  5. Check

    • (i) Is it right?
    • Cube the height ratio and you should get the volumes back: 5³ : 7³ = 125 : 343, and doubling gives 250 : 686 ✓
    • The larger tin is taller: 7 against 5. A ratio has no units ✓

Common mistakes to avoid

Key terms

enlargement · centre of enlargement · scale factor · image · area factor · volume factor