Step 14 of 14 · Worked example · TEACH

← Geometry & Trigonometry

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Geometry · Step 14

Extract the plane triangle, then work only inside it.

A rectangular box has base 6 cm by 8 cm and height 5 cm. Find the length of the space diagonal, and the angle it makes with the base.

The pyramid, reduced to one flat triangle

A pyramid with a rectangular base ABCD, 12 cm by 8 cm, and apex V 9 cm vertically above O, the centre of the base.

  • Base

    A 12 cm by 8 cm rectangle. Its diagonal AC is √208 = 4√13 cm, and O is its midpoint.

  • Height

    VO = 9 cm, perpendicular to the base.

The flat triangle the work happens in

Right-angled triangle VOC: right angle at O

Sides: OC = 2√13 ≈ 7.21 cm (half the base diagonal), VO = 9 cm (height), VC = √133 ≈ 11.53 cm (sloping edge) · Angle: θ at C, between the sloping edge VC and the base line OC: tan θ = 9 ÷ 2√13, θ ≈ 51.3°

Every calculation happens in the upright triangle listed last; the pyramid itself is only there to locate it.

A pyramid has a rectangular base ABCD, 12 cm by 8 cm. O is the centre of the base.

The apex V is 9 cm vertically above O.

Find the length of the sloping edge VC, to 2 decimal places, and the angle θ it makes with the base, to 1 decimal place.

Read it once, slowly. Then copy it onto your page.
  • What is the base? A 12 by 8 rectangle. Its centre O is where the two diagonals cross.
  • Where is the top? Straight above O, 9 cm up. "Vertically" is the key word: it gives a right angle.
  • What do they want? The edge from the top down to corner C, to 2 d.p., and its angle with the base, to 1 d.p.
Céim

Higher Level Maths · Geometry & Trigonometry · Step 14 of 14

3D Trigonometry

Extracting the single right-angled triangle from a three-dimensional solid, and working in that flat triangle.

Why it matters

Three-dimensional questions are two-dimensional questions in disguise; the marks are in identifying the correct plane.

The worked example

A pyramid has a rectangular base ABCD, 12 cm by 8 cm. O is the centre of the base. The apex V is 9 cm vertically above O. Find the length of the sloping edge VC, to 2 decimal places, and the angle θ it makes with the base, to 1 decimal place.

How the worked example goes

  1. Read

    • What is the base? A 12 by 8 rectangle. Its centre O is where the two diagonals cross.
    • Where is the top? Straight above O, 9 cm up. "Vertically" is the key word: it gives a right angle.
    • What do they want? The edge from the top down to corner C, to 2 d.p., and its angle with the base, to 1 d.p.
  2. Understand

    • How do I picture it?
    • Never work in 3D. Find a flat right-angled triangle that holds the answer, and work in that.
    • VO stands straight up from the base, so it meets every line on the base at 90°. That includes OC, from the centre to corner C.
  3. Reduce

    • Which length is |OC|, from the centre to corner C? Half the diagonal |AC|: O is where the diagonals cross, at the midpoint of AC. So |OC| = ½|AC|.
    • What are the steps?
    • 1. Base triangle ABC: Pythagoras for |AC|, then halve it.
  4. Solve

    • How far is C from O?
    • |AC|² = 12² + 8² = 144 + 64 = 208
    • |AC| = √208 = √(16 × 13) = 4√13
  5. Check

    • Is it right?
    • A second route: from O to C is 6 across and 4 along, then 9 up. 6² + 4² + 9² = 36 + 16 + 81 = 133 ✓
    • Height back: √133 × sin 51.29…° = 9 = |VO| ✓

Common mistakes to avoid

Key terms

plane · space diagonal · projection · vertical plane · base