Step 11 of 12 · Worked example · TEACH

← Coordinate Geometry

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Coordinate Geometry · Step 11

Compare the distance from the centre with the radius, then locate the contact point.

The circle is x² + y² = 10. (i) Show that x − 3y + 10 = 0 is a tangent to it, and find the point of contact. (ii) Investigate how y = x − 2 meets the circle, and find any points of intersection.

The circle is x² + y² = 10.

(i) Show that x − 3y + 10 = 0 is a tangent to it. Find T, the point of contact.

(ii) Investigate how y = x − 2 meets the circle. Find any points where they meet.

Read it once, slowly. Then copy it onto your page.
  • What is fixed? x² + y² = 10 is (x − 0)² + (y − 0)² = 10: centre (0, 0), radius √10, about 3.16. Not 10.
  • (i) Show that means prove it by calculation. A sketch that looks like a touch is not proof. Tangent: touches once. Then find T, where it touches.
  • (ii) Investigate: they do not say what happens. Decide whether y = x − 2 cuts, touches or misses, then find the points.
Céim

Higher Level Maths · Coordinate Geometry · Step 11 of 12

Lines Meeting Circles: Tangents & Chords

Comparing the perpendicular distance from the centre with the radius tells you whether a line misses, touches or cuts a circle. Then the perpendicular radius finds a tangent's point of contact, and substituting the line into the circle finds a chord's two points.

Why it matters

Tangent and chord questions are standard Higher Level marks, and this single comparison decides every one of them.

The worked example

The circle is x² + y² = 10. (i) Show that x − 3y + 10 = 0 is a tangent to it. Find T, the point of contact. (ii) Investigate how y = x − 2 meets the circle. Find any points where they meet.

How the worked example goes

  1. Read

    • What is fixed? x² + y² = 10 is (x − 0)² + (y − 0)² = 10: centre (0, 0), radius √10, about 3.16. Not 10.
    • (i) Show that means prove it by calculation. A sketch that looks like a touch is not proof. Tangent: touches once. Then find T, where it touches.
    • (ii) Investigate: they do not say what happens. Decide whether y = x − 2 cuts, touches or misses, then find the points.
  2. Understand

    • (i) How can I tell if a line touches?
    • Measure how far the line is from the centre, square on: the perpendicular distance, d.
    • d < r: cuts twice (a chord)
  3. Reduce

    • (i) Where do I start?
    • The line is already ax + by + c = 0: a = 1, b = −3, c = 10. The point is the centre, (0, 0).
    • d = ()/(1(0) − 3(0) + 10||√(1² + (−3)²))
  4. Solve

    • (i) Prove it, then: where does it touch?
    • d = (10)/(√10) = √10 = r
    • 10/√10 = √10, because √10 × √10 = 10. d = r, so the line is a tangent.
  5. Check

    • (i) Is it right?
    • T on the circle: (−1)² + 3² = 10 ✓. On the line: −1 − 9 + 10 = 0 ✓
    • Another way: put x = 3y − 10 into the circle. It gives 10y² − 60y + 90 = 0, which is (y − 3)² = 0.

Common mistakes to avoid

Key terms

tangent · chord · perpendicular distance · point of contact