Step 10 of 11 · Worked example · TEACH

← States of Matter & Gas Laws

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Chemistry · States of Matter & Gas Laws · Step 10

Study the worked example and explain each step.

A volatile liquid is vaporised to fill a flask of known volume at measured temperature and pressure. Explain which measurements allow its molar mass to be estimated using the ideal model.

A volatile liquid is vaporised to fill a flask of known volume,

at measured temperature and pressure.

Explain which measurements allow its molar mass to be estimated using the ideal model.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A volatile liquid turns into a gas easily. It is heated until its gas, called a vapour, fills a flask.
  • What do we know? The flask's volume, and the vapour's temperature and pressure. No numbers are given.
  • The ideal model: treat the vapour as an ideal gas, so PV = nRT works for it.
  • What do they want? Which measurements are needed to find the molar mass, M, and why.
Céim

Ordinary Level Chemistry · States of Matter & Gas Laws · Step 10 of 11

Experimental gas molar mass

A vapour's molar mass is found by dividing its measured mass by the amount calculated from PV = nRT.

Why it matters

Reliable experimental results depend on measuring the same vapour sample without including residual air or external water.

The worked example

A volatile liquid is vaporised to fill a flask of known volume, at measured temperature and pressure. Explain which measurements allow its molar mass to be estimated using the ideal model.

How the worked example goes

  1. Read

    • What is going on? A volatile liquid turns into a gas easily. It is heated until its gas, called a vapour, fills a flask.
    • What do we know? The flask's volume, and the vapour's temperature and pressure. No numbers are given.
    • The ideal model: treat the vapour as an ideal gas, so PV = nRT works for it.
  2. Understand

    • What is molar mass made of?
    • Molar mass is the mass of one mole, in g mol⁻¹. Water's is 18: 36 g of water is 2 moles, and 36 ÷ 2 = 18.
    • M = (m)/(n)
  3. Reduce

    • Which measurements give the molar mass? m, P, V and T of the vapour: P, V and T give n from PV = nRT. The mass m of the same vapour then gives M = m ÷ n.
    • Where do I start?
    • Name the four measurements, with how each is taken. Then join them in one formula.
  4. Solve

    • What do I measure?
    • 1. Weigh the dry, empty flask with its cover.
    • 2. Heat the flask in a boiling-water bath until vapour fills it and pushes out the air. T: the bath's temperature, in kelvin. P: air pressure, from a barometer, as a pinhole keeps the flask open.
  5. Check

    • Does it hold together, and did I answer it?
    • Units: n comes out in mol, so g ÷ mol = g mol⁻¹, a molar mass ✓
    • No numbers are given, so the units are the test here.