Step 4 of 8 · Worked example · TEACH

← Rates of Reaction

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Chemistry · Rates of Reaction · Step 4

Follow the worked example. At each stage, explain why the next step is justified.

Hydrogen peroxide breaks down to water and oxygen when manganese(IV) oxide is added. Describe how to collect the oxygen over water to measure the rate, and give one limitation.

Hydrogen peroxide breaks down to water and oxygen when manganese(IV) oxide is added.

2H₂O₂ → 2H₂O + O₂

Describe how to collect the oxygen over water to measure the rate. Give one limitation.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Hydrogen peroxide breaks down and gives off oxygen gas, O₂.
  • Manganese(IV) oxide, MnO₂, is the catalyst. It speeds the breakdown up.
  • What do they want first? A method to collect the oxygen over water, set up to measure the rate, not just the total.
  • And second? One limitation: a real problem with this method.
Céim

Ordinary Level Chemistry · Rates of Reaction · Step 4 of 8

Measuring rate experimentally [practical work]

To measure a rate, you follow something that changes during the reaction, such as gas volume or mass, and record it against time.

Why it matters

Experiment questions ask you to describe how you measured a rate and name a problem with the method. You need to say what you measured and what you kept the same.

The worked example

Hydrogen peroxide breaks down to water and oxygen when manganese(IV) oxide is added. 2H₂O₂ → 2H₂O + O₂ Describe how to collect the oxygen over water to measure the rate. Give one limitation.

How the worked example goes

  1. Read

    • What is going on? Hydrogen peroxide breaks down and gives off oxygen gas, O₂.
    • Manganese(IV) oxide, MnO₂, is the catalyst. It speeds the breakdown up.
    • What do they want first? A method to collect the oxygen over water, set up to measure the rate, not just the total.
  2. Understand

    • How do I see a rate?
    • Rate is how fast something changes. So follow something that changes as time goes on.
    • Here the volume of oxygen rises as the reaction goes on.
  3. Reduce

    • To measure the rate, what should you record? The gas volume every 20 s: Volume against time shows how fast the oxygen is made.
    • Where do I start?
    • Write the method in the order you would do it: set up, start, read, stop.
  4. Solve

    • Write the method.
    • 1. Put hydrogen peroxide in a conical flask. Fill a graduated cylinder with water and turn it upside down in a basin of water.
    • 2. Add the MnO₂. Fit the bung at once; its delivery tube leads up into the cylinder.
  5. Check

    • Is it right?
    • Does it give the rate? Yes: readings against time show how fast the gas is made ✓
    • Is the limitation real? Yes: it belongs to this apparatus, and it changes the readings ✓

Common mistakes to avoid

Key terms

gas syringe · stopwatch · limitation · control