Step 5 of 9 · Worked example · TEACH

← Nature of Science & Investigation Reasoning

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Chemistry · Nature of Science & Investigation Reasoning · Step 5

Follow the worked example. At each stage, explain why the next step is justified.

Explain why scientists repeat measurements and take an average.

Scientists often repeat a measurement and take an average.

Explain why they do this.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Scientists repeat a measurement several times, then take the average: the mean of the readings.
  • What do they want? Explain why: what problem repeating and averaging solves.
Céim

Ordinary Level Chemistry · Nature of Science & Investigation Reasoning · Step 5 of 9

Errors & uncertainty

No measurement is perfect. Some errors are random, which repeating helps with. Others always push readings the same way, and these must be fixed at the source.

Why it matters

Questions ask you to spot sources of error in an experiment and say how to reduce them.

The worked example

Scientists often repeat a measurement and take an average. Explain why they do this.

How the worked example goes

  1. Read

    • What is going on? Scientists repeat a measurement several times, then take the average: the mean of the readings.
    • What do they want? Explain why: what problem repeating and averaging solves.
  2. Understand

    • Why aren't readings all the same?
    • An error is a difference between a reading and the true value.
    • Made-up numbers: say the true time is 35 s
  3. Reduce

    • Why does the average help? Highs and lows balance out: High and low readings balance out, so the mean is closer to the true value.
    • Where do I start?
    • (34 + 36 + 35) ÷ 3 = 105 ÷ 3 = 35 s
  4. Solve

    • Write the answer.
    • 1. Each reading has small random errors, so the readings are not all the same.
    • 2. Averaging lets the high and low readings balance out.
  5. Check

    • Is it right?
    • Our three readings: errors −1, +1, 0 average to 0 ✓
    • The made-up 0.30 g balance error is systematic: averaging still leaves it 0.30 g too high. Zeroing the balance first fixes that one.

Key terms

error · random error · zero error · parallax