Step 10 of 11 · Worked example · TEACH

← States of Matter & Gas Laws

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · States of Matter & Gas Laws · Step 10

Study the worked example and explain each step.

A volatile liquid is vaporised to fill a flask of known volume at measured temperature and pressure. Explain which measurements allow its molar mass to be estimated using the ideal model.

A volatile liquid is vaporised to fill a flask of known volume, at measured temperature and pressure.

Explain which measurements allow its molar mass to be estimated using the ideal model.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A volatile liquid, one that turns to gas easily, is heated until its vapour fills a flask.
  • What do we know? The flask's volume, and the temperature and pressure of the vapour, measured. No numbers are given.
  • The ideal model: we may treat the vapour as an ideal gas, so PV = nRT applies.
  • What do they want? Which measurements are needed to find the molar mass, M, and why each one.
Céim

Higher Level Chemistry · States of Matter & Gas Laws · Step 10 of 11

Experimental gas molar mass

A vapour’s molar mass is found by dividing its measured mass by the amount calculated from PV = nRT.

Why it matters

Exam questions test both unit handling and how experimental errors affect the inferred molar mass.

The worked example

A volatile liquid is vaporised to fill a flask of known volume, at measured temperature and pressure. Explain which measurements allow its molar mass to be estimated using the ideal model.

How the worked example goes

  1. Read

    • What is going on? A volatile liquid, one that turns to gas easily, is heated until its vapour fills a flask.
    • What do we know? The flask's volume, and the temperature and pressure of the vapour, measured. No numbers are given.
    • The ideal model: we may treat the vapour as an ideal gas, so PV = nRT applies.
  2. Understand

    • What is molar mass made of?
    • Molar mass is mass per mole: the grams of vapour shared over the moles of vapour.
    • M = (m)/(n)
  3. Reduce

    • Which measurements give the molar mass? m, P, V and T of the vapour: P, V and T give n through PV = nRT; the mass m of the same vapour then gives M = m/n.
    • Where do I start?
    • Name the four measurements, each with how it is taken. Then join them in one formula.
  4. Solve

    • What do I measure?
    • 1. Volume V: fill the flask with water and measure that water in a graduated cylinder.
    • 2. Temperature T: the boiling-water bath the flask sits in, converted to kelvin.
  5. Check

    • Does it hold together?
    • Units: RT is in J mol⁻¹ and PV in Pa × m³ = J, so (g × J mol⁻¹)/(J) = g mol⁻¹, a molar mass ✓
    • Work back: m ÷ M = m × (PV)/(mRT) = (PV)/(RT), the moles from the gas law ✓