Step 10 of 12 · Worked example · TEACH

← Redox & Electrochemistry

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Redox & Electrochemistry · Step 10

Follow the worked example. At each stage, explain why the next step is justified.

Write the cathode and anode half-equations for the electrolysis of dilute sulfuric acid with inert electrodes, and combine them into an overall equation.

Dilute sulfuric acid is electrolysed with inert electrodes.

Write the cathode and anode half equations, and combine them into an overall equation.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Dilute sulfuric acid: water with H⁺ ions in it. Hydrogen forms at the cathode and oxygen at the anode.
  • What is fixed? Inert electrodes: they take no part, so only H⁺ and water react.
  • What do they want? Both half equations, then one overall equation made from them.
Céim

Higher Level Chemistry · Redox & Electrochemistry · Step 10 of 12

Electrode equations in aqueous systems

Electrode equations for aqueous electrolysis are half-equations that may include water, H⁺ or OH⁻; the electrons in the two half-equations must be equal before they are added to give the overall equation.

Why it matters

Writing balanced electrode equations, and combining them, is a standard Higher Level skill, and errors in electron number or electron side are heavily penalised.

The worked example

Dilute sulfuric acid is electrolysed with inert electrodes. Write the cathode and anode half equations, and combine them into an overall equation.

How the worked example goes

  1. Read

    • What is going on? Dilute sulfuric acid: water with H⁺ ions in it. Hydrogen forms at the cathode and oxygen at the anode.
    • What is fixed? Inert electrodes: they take no part, so only H⁺ and water react.
    • What do they want? Both half equations, then one overall equation made from them.
  2. Understand

    • What happens at each electrode?
    • Cathode (−): reduction. H⁺ ions arrive and gain electrons; pairs of H atoms join as H₂.
    • Anode (+): oxidation. Water molecules lose electrons; their O atoms pair up as O₂, and their H is left behind as H⁺.
  3. Reduce

    • Cathode 2 e⁻, anode 4 e⁻. What next? Double the cathode: 2 × 2 = 4 electrons gained, to match the 4 lost at the anode.
    • Where do I start?
    • Multiply every species in the cathode equation by 2. Then add left to left, right to right, and cancel what is on both sides.
  4. Solve

    • Match the electrons and add.
    • This works because the electrons then cancel exactly: none can be left in an overall equation.
    • Cathode × 2
  5. Check

    • Is it right?
    • Anode charge
    • 0 = 4(+1) + 4(−1) ✓

Common mistakes to avoid

Key terms

electrode equation · overall equation · electron balance · acidic notation