Step 9 of 12 · Worked example · TEACH

← Redox & Electrochemistry

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Redox & Electrochemistry · Step 9

Follow the worked example. At each stage, explain why the next step is justified.

Dilute sulfuric acid is electrolysed with inert electrodes. Hydrogen forms at the cathode and oxygen at the anode. State the volume ratio of hydrogen to oxygen and the overall reaction.

Dilute sulfuric acid is electrolysed with inert electrodes. Hydrogen forms at the cathode and oxygen at the anode.

State the volume ratio of hydrogen to oxygen and the overall reaction.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Dilute sulfuric acid is mostly water with a little H₂SO₄. Inert electrodes take no part.
  • What is fixed? Two gases are collected: hydrogen at the cathode and oxygen at the anode.
  • What do they want? The volume ratio, hydrogen first, and the overall reaction as an equation.
Céim

Higher Level Chemistry · Redox & Electrochemistry · Step 9 of 12

Aqueous electrolysis and competing species

In aqueous electrolysis, water molecules compete with the dissolved ions at each electrode, so the products depend on which species is most easily reduced at the cathode and most easily oxidised at the anode.

Why it matters

The mandatory experiments — electrolysis of sodium sulfate with indicator, potassium iodide with phenolphthalein, and copper sulfate with copper electrodes — are regularly examined, with marks for products, observations and explanations.

The worked example

Dilute sulfuric acid is electrolysed with inert electrodes. Hydrogen forms at the cathode and oxygen at the anode. State the volume ratio of hydrogen to oxygen and the overall reaction.

How the worked example goes

  1. Read

    • What is going on? Dilute sulfuric acid is mostly water with a little H₂SO₄. Inert electrodes take no part.
    • What is fixed? Two gases are collected: hydrogen at the cathode and oxygen at the anode.
    • What do they want? The volume ratio, hydrogen first, and the overall reaction as an equation.
  2. Understand

    • Where do the gases come from?
    • In a solution, water molecules are at both electrodes too. They compete with the dissolved ions to be reduced or oxidised.
    • Sulfate is very hard to oxidise, so at the anode water loses electrons instead and gives oxygen. At the cathode H⁺ is reduced to hydrogen.
  3. Reduce

    • Which is the overall equation? 2H₂O → 2H₂ + O₂: Water is split. H: 4 = 4 and O: 2 = 2, so it balances.
    • Where do I start?
    • Write the balanced equation for splitting water. Then read the moles of H₂ and O₂ straight from it.
  4. Solve

    • Balance it, then read the ratio.
    • This works because the coefficients count moles, and moles of gas fix the volumes.
    • 2H₂O → 2H₂ + O₂
  5. Check

    • Is it right?
    • at s.t.p.: 22.4 L per mole
    • 2 × 22.4 = 44.8 L H₂

Common mistakes to avoid

Key terms

aqueous electrolysis · competing species · universal indicator · active electrode