Step 4 of 9 · Worked example · TEACH

← Rates of Reaction

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Rates of Reaction · Step 4

Follow the worked example. At each stage, explain why the next step is justified.

Hydrogen peroxide decomposes in the presence of manganese(IV) oxide: 2H₂O₂ → 2H₂O + O₂. Propose a method to measure the rate of this reaction and state one limitation.

Hydrogen peroxide decomposes in the presence of manganese(IV) oxide:

2H₂O₂ → 2H₂O + O₂

Propose a method to measure the rate of this reaction, and state one limitation.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Hydrogen peroxide breaks down into water and oxygen gas. The equation balances: 4 H and 4 O on each side.
  • Manganese(IV) oxide, MnO₂, is a black powder. It is the catalyst: it speeds things up and is not used up.
  • What do they want? Two things: a method that measures the rate, step by step, and one limitation of that method.
Céim

Higher Level Chemistry · Rates of Reaction · Step 4 of 9

Measuring rate experimentally [practical work]

A reaction rate is measured by following one quantity that changes as the reaction proceeds — gas volume, mass, colour or the time to a fixed visual change — at controlled conditions.

Why it matters

Practical questions ask you to describe how a rate was measured, draw the apparatus, and identify a limitation or source of error; marks depend on naming the measured quantity and the control.

The worked example

Hydrogen peroxide decomposes in the presence of manganese(IV) oxide: 2H₂O₂ → 2H₂O + O₂ Propose a method to measure the rate of this reaction, and state one limitation.

How the worked example goes

  1. Read

    • What is going on? Hydrogen peroxide breaks down into water and oxygen gas. The equation balances: 4 H and 4 O on each side.
    • Manganese(IV) oxide, MnO₂, is a black powder. It is the catalyst: it speeds things up and is not used up.
    • What do they want? Two things: a method that measures the rate, step by step, and one limitation of that method.
  2. Understand

    • What does "measure the rate" need?
    • A rate is how fast something changes. So you need a quantity that changes as the reaction goes, read again and again against time.
    • One final reading tells you how much was made, not how fast. Readings against time give a curve, and its slope is the rate.
  3. Reduce

    • What should you record? O₂ volume every 30 s: Volume against time gives a curve, and its slope is the rate.
    • How do I set it up fairly?
    • Start the clock the moment the MnO₂ meets the peroxide: that is time zero.
  4. Solve

    • Write the method.
    • 1. Put the H₂O₂ in a conical flask, linked by a bung and delivery tube to a gas syringe.
    • 2. Add the MnO₂, fit the bung at once and start the stopwatch.
  5. Check

    • Is it right?
    • Does it give a rate? Yes: readings against time give a curve, and its slope is the rate ✓
    • Is the limitation real? Yes: it names an error in this apparatus, with its effect on the readings ✓

Common mistakes to avoid

Key terms

gas syringe · colorimeter · end point · fair test