Higher Level Chemistry · Organic Chemistry · Step 16 of 21
Ester preparation and purification evidence
An ester is prepared by refluxing a carboxylic acid and an alcohol with a few drops of concentrated sulfuric acid, then separating, washing and drying the product; the percentage yield compares the dry, pure mass with the theoretical mass.
Why it matters
Preparation questions ask why reflux is used, how the crude product is purified, and how to calculate and judge a percentage yield.
The worked example
Explain why an esterification mixture is heated under reflux rather than in an open flask.
How the worked example goes
Read
- What is given? An esterification mixture: a carboxylic acid, an alcohol and a few drops of concentrated sulfuric acid as catalyst. The mixture must be heated.
- Two set-ups are compared: under reflux, with a condenser standing upright on the flask, and an open flask, with nothing on top.
- What do they want? The reason reflux is used. Nothing to calculate: explain what each set-up does.
Understand
- Why heat it for so long?
- Esterification is slow. Even with the sulfuric acid catalyst, the mixture must be heated for a long time to get a useful amount of ester.
- For ethyl ethanoate: ethanol boils at 78 °C, the ester at 77 °C, ethanoic acid at 118 °C. All are volatile: they turn to vapour easily.
Reduce
- The mixture is heated for an hour in an open flask. What happens? Volatile liquids boil away: Acid, alcohol and ester all have low boiling points, so their vapours escape and the yield falls.
- Where do I start?
- The set-up must meet two needs: heat for a long time, and keep every volatile substance in the flask. Test each set-up against both.
Solve
- Write the explanation.
- 1. Esterification is slow, so the mixture must be heated for a long time.
- 2. The acid, the alcohol and the ester are volatile. In an open flask their vapours escape and the yield falls.
Check
- Is it right?
- Under reflux the volume of mixture stays the same while it is heated ✓
- Contrast: with the condenser sloping down (distillation), the vapour runs into another flask. That suits collecting the ester at the end, not a long reaction ✓
Common mistakes to avoid
- Weighs the product while it is still wet
- Uses the mass of the excess reactant for the theoretical yield
- Accepts a yield above 100 % without question
Key terms
reflux · separating funnel · drying agent · percentage yield