Step 2 of 9 · Worked example · TEACH

← Nature of Science & Investigation Reasoning

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Nature of Science & Investigation Reasoning · Step 2

Follow the worked example. At each stage, explain why the next step is justified.

Three concordant titres are 22.15 cm³, 22.10 cm³ and 22.20 cm³. Calculate the mean titre.

Three concordant titres are 22.15 cm³, 22.10 cm³ and 22.20 cm³.

Calculate the mean titre.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A titration was done several times. Three titres, the volumes run in from the burette: 22.15, 22.10 and 22.20 cm³.
  • The key word: concordant. Titres that agree closely, within about 0.10 cm³ of each other.
  • What do they want? The mean titre: the single best value to use in the calculation that follows.
Céim

Higher Level Chemistry · Nature of Science & Investigation Reasoning · Step 2 of 9

Making & recording measurements (precision & accuracy)

Good measurements are recorded to the correct precision of the instrument, averaged over concordant repeats, and judged for both precision (how close repeats are) and accuracy (how close they are to the true value).

Why it matters

Titration and measurement questions ask for a correct mean, the right number of decimal places, and the difference between precision and accuracy.

The worked example

Three concordant titres are 22.15 cm³, 22.10 cm³ and 22.20 cm³. Calculate the mean titre.

How the worked example goes

  1. Read

    • What is going on? A titration was done several times. Three titres, the volumes run in from the burette: 22.15, 22.10 and 22.20 cm³.
    • The key word: concordant. Titres that agree closely, within about 0.10 cm³ of each other.
    • What do they want? The mean titre: the single best value to use in the calculation that follows.
  2. Understand

    • Which titres count?
    • The first, quick run of a titration is the rough titre. It only shows roughly where the end point is, so it is left out.
    • Only titres that agree go into the mean. Here: highest 22.20, lowest 22.10, a spread of 0.10 cm³. All three are concordant.
  3. Reduce

    • To how many decimal places should the mean titre be given? Two, like the readings: A burette is read to 0.05 cm³, so titres are recorded to two decimal places. The mean matches.
    • Where do I start?
    • Add the three titres, divide by 3, and give two decimal places.
  4. Solve

    • Add, then share by 3.
    • sum = 22.15 + 22.10 + 22.20 = 66.45 cm³
    • mean = (66.45)/(3)
  5. Check

    • Is it right?
    • Size: 22.15 lies between the lowest, 22.10, and the highest, 22.20, as a mean must ✓
    • Balance: 22.10 is 0.05 below and 22.20 is 0.05 above. They cancel, so the mean is the middle value ✓

Key terms

mean titre · concordant results · precision · accuracy