Step 4 of 9 · Worked example · TEACH

← Nature of Science & Investigation Reasoning

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Nature of Science & Investigation Reasoning · Step 4

Follow the worked example. At each stage, explain why the next step is justified.

Within a tested linear range, a response is 11 at an input of 3 and 33 at an input of 7. Estimate the response at an input halfway between, and state the limit of this estimate.

Within a tested linear range, a response is 11 at an input of 3, and 33 at an input of 7.

Estimate the response at an input halfway between. State the limit of this estimate.

Read it once, slowly. Then copy it onto your page.
  • What was measured? Two results: a response of 11 at input 3 and 33 at input 7. Think of a calibration: put in a known amount, read the signal.
  • The key words: within a tested linear range. Between the tested inputs, the results lie on a straight line.
  • What do they want? The response halfway between the inputs, and the limit of the estimate: where it stops being trustworthy.
Céim

Higher Level Chemistry · Nature of Science & Investigation Reasoning · Step 4 of 9

Interpreting results

Results are interpreted by reading trends and values from data and graphs; values may be estimated between measured points (interpolation) but not safely beyond them (extrapolation), and a single comparison does not establish a general rule.

Why it matters

Interpretation questions ask you to estimate values from a linear relationship, read a calibration graph, spot anomalies and judge how far a pattern can be generalised.

The worked example

Within a tested linear range, a response is 11 at an input of 3, and 33 at an input of 7. Estimate the response at an input halfway between. State the limit of this estimate.

How the worked example goes

  1. Read

    • What was measured? Two results: a response of 11 at input 3 and 33 at input 7. Think of a calibration: put in a known amount, read the signal.
    • The key words: within a tested linear range. Between the tested inputs, the results lie on a straight line.
    • What do they want? The response halfway between the inputs, and the limit of the estimate: where it stops being trustworthy.
  2. Understand

    • How do I picture it?
    • Two measured points joined by a straight line. Between them, every input has one response on that line.
    • On a straight line, equal steps in input give equal steps in response. So halfway along in input is halfway up in response.
  3. Reduce

    • Where do I start?
    • Halfway means the average. Average the inputs, then average the responses.
    • halfway input = (3 + 7)/(2)
  4. Solve

    • Average the inputs, then the responses.
    • input = (3 + 7)/(2) = 5
    • response = (11 + 33)/(2) = 22
  5. Check

    • Is it right?
    • Slope: (33 − 11) ÷ (7 − 3) = 5.5 per unit of input. From 3 to 5 is 2 units: 11 + 2 × 5.5 = 22 ✓
    • Size: 22 lies between 11 and 33, and 5 lies between 3 and 7. Interpolation, as claimed ✓

Common mistakes to avoid

Key terms

interpolation · extrapolation · calibration line · anomalous result