Step 1 of 7 · Worked example · TEACH

← Energetics (Thermochemistry)

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Energetics (Thermochemistry) · Step 1

Follow the worked example. At each stage, explain why the next step is justified.

Magnesium ribbon is added to dilute hydrochloric acid in a polystyrene cup. The temperature of the solution rises from 18 °C to 31 °C. Classify the reaction and give the sign of ΔH.

Magnesium ribbon is added to dilute hydrochloric acid in a polystyrene cup.

The temperature of the solution rises from 18 °C to 31 °C.

Classify the reaction and give the sign of ΔH.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Magnesium reacts with acid in a polystyrene cup. Polystyrene keeps heat in, so the heat stays in the solution where we can measure it.
  • What is measured? The solution warms from 18 °C to 31 °C.
  • What do they want? Exothermic or endothermic, and whether ΔH is + or −. No number is asked for.
Céim

Higher Level Chemistry · Energetics (Thermochemistry) · Step 1 of 7

Exothermic vs endothermic

An exothermic reaction transfers heat from the reacting system to the surroundings, so ΔH is negative; an endothermic reaction takes heat in from the surroundings, so ΔH is positive.

Why it matters

Classification questions give a temperature change or an energy diagram, and the mark depends on stating the direction of heat flow and the sign of ΔH together.

The worked example

Magnesium ribbon is added to dilute hydrochloric acid in a polystyrene cup. The temperature of the solution rises from 18 °C to 31 °C. Classify the reaction and give the sign of ΔH.

How the worked example goes

  1. Read

    • What is going on? Magnesium reacts with acid in a polystyrene cup. Polystyrene keeps heat in, so the heat stays in the solution where we can measure it.
    • What is measured? The solution warms from 18 °C to 31 °C.
    • What do they want? Exothermic or endothermic, and whether ΔH is + or −. No number is asked for.
  2. Understand

    • Whose energy is the thermometer measuring?
    • Split the cup in two. The reacting particles, magnesium and acid, are the system.
    • Everything around them, the water of the solution and the cup, is the surroundings. The thermometer sits in the surroundings.
  3. Reduce

    • Where do I start?
    • Start with what was measured: the temperature change of the solution.
    • A rise means heat flowed into the solution, out of the system. Then name the class and the sign.
  4. Solve

    • How much did it warm?
    • ΔT = 31 − 18
    • ΔT = 13 °C (a rise)
  5. Check

    • Is it right?
    • Test the opposite. Had the solution cooled, heat would have flowed into the system: endothermic, ΔH positive. Ours warmed, so the reverse holds ✓
    • Trap: the size, 13 °C, tells how much heat moved, not which class it is.

Common mistakes to avoid

Key terms

exothermic · endothermic · system · surroundings