Step 4 of 7 · Worked example · TEACH

← Energetics (Thermochemistry)

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Energetics (Thermochemistry) · Step 4

Follow the worked example. At each stage, explain why the next step is justified.

A reaction in a polystyrene calorimeter warms 120 g of solution by 6.5 K. Take the specific heat capacity of the solution as that of water. Calculate the heat gained by the solution.

A reaction in a polystyrene calorimeter warms 120 g of solution by 6.5 K.

Take the specific heat capacity of the solution as that of water.

Calculate the heat gained by the solution.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A reaction runs in a polystyrene cup: a calorimeter. The polystyrene keeps the heat in the solution.
  • What is measured? 120 g of solution gets warmer by 6.5 K. A rise of 6.5 K is a rise of 6.5 °C.
  • Treat the solution as water: use water's specific heat capacity, c = 4.18 J g⁻¹ K⁻¹.
  • What do they want? The heat gained by the solution, q. Not ΔH: just the heat.
Céim

Higher Level Chemistry · Energetics (Thermochemistry) · Step 4 of 7

Calorimetry & measuring ΔH [practical work]

In a calorimeter, the heat gained by the solution is found from q = m × c × ΔT, and dividing that heat by the moles reacted gives the molar enthalpy change.

Why it matters

The mandatory experiments on heat of reaction and heat of combustion are examined almost every year, and marks go for the q = mcΔT calculation, the per-mole step, the sign and the sources of error.

The worked example

A reaction in a polystyrene calorimeter warms 120 g of solution by 6.5 K. Take the specific heat capacity of the solution as that of water. Calculate the heat gained by the solution.

How the worked example goes

  1. Read

    • What is going on? A reaction runs in a polystyrene cup: a calorimeter. The polystyrene keeps the heat in the solution.
    • What is measured? 120 g of solution gets warmer by 6.5 K. A rise of 6.5 K is a rise of 6.5 °C.
    • Treat the solution as water: use water's specific heat capacity, c = 4.18 J g⁻¹ K⁻¹.
  2. Understand

    • What does 4.18 J g⁻¹ K⁻¹ mean?
    • It takes 4.18 J to warm 1 g of water by 1 K. That is what specific heat capacity means.
    • So 120 g warmed by 1 K needs 120 times as much: 120 × 4.18 = 501.6 J.
  3. Reduce

    • Where do I start?
    • 6.5 K is already a rise, so it goes straight in as ΔT.
    • Grams times J g⁻¹ K⁻¹ times K leaves joules. Then change joules to kJ.
  4. Solve

    • Write q with the numbers on your page. Which is it? 120 × 4.18 × 6.5: Mass × specific heat capacity × temperature rise.
    • Multiply, then change to kJ.
    • q = 120 × 4.18 × 6.5
  5. Check

    • Is it right?
    • Other order
    • 4.18 × 6.5 = 27.17

Common mistakes to avoid

Key terms

calorimeter · specific heat capacity · temperature rise · heat loss