Step 2 of 10 · Worked example · TEACH

← Chemistry in Society

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Chemistry in Society · Step 2

Follow the worked example. At each stage, explain why the next step is justified.

A process emits 220 kg of CO₂ per batch. A modified process making the same output emits 130 kg per batch. Calculate the percentage reduction.

A process emits 220 kg of CO₂ per batch. A modified process making the same output emits 130 kg per batch.

Calculate the percentage reduction.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A process is changed to cut its CO₂. Before: 220 kg per batch. After: 130 kg per batch.
  • Why does this matter? Both make the same output per batch. So the two figures are a fair, like-for-like comparison.
  • What do they want? The percentage reduction: what fraction of the original CO₂ was cut, as a percentage.
Céim

Higher Level Chemistry · Chemistry in Society · Step 2 of 10

Atmospheric chemistry & pollution

Industrial and transport activities release pollutants such as CO₂, SO₂, NOₓ and CFCs; comparing emissions fairly needs the same output basis, and each pollutant causes a different problem.

Why it matters

Questions ask you to calculate reductions in emissions, compare emissions per unit of product, and distinguish the greenhouse effect, ozone depletion and acid rain.

The worked example

A process emits 220 kg of CO₂ per batch. A modified process making the same output emits 130 kg per batch. Calculate the percentage reduction.

How the worked example goes

  1. Read

    • What is going on? A process is changed to cut its CO₂. Before: 220 kg per batch. After: 130 kg per batch.
    • Why does this matter? Both make the same output per batch. So the two figures are a fair, like-for-like comparison.
    • What do they want? The percentage reduction: what fraction of the original CO₂ was cut, as a percentage.
  2. Understand

    • How much was actually cut?
    • The process used to emit 220 kg. Now it emits 130 kg. The cut is the difference.
    • A percentage compares that cut with where we started. Had it fallen to 110 kg, half the original, that would be a 50 % reduction.
  3. Reduce

    • The cut is 220 − 130. What do you divide it by? 220 kg, the original: A reduction is measured against where you started, so the cut is shared over the original 220 kg.
    • Where do I start?
    • Two steps: find the cut in kg, then divide by the original and multiply by 100.
  4. Solve

    • Find the cut, then the percentage.
    • cut = 220 − 130 = 90 kg
    • % reduction = (90)/(220) × 100
  5. Check

    • Is it right?
    • Work back: 40.9 % off 220 kg leaves 220 × 0.591 = 130.0 kg ✓
    • Size: 90 is less than half of 220, so the answer must be under 50 % ✓

Common mistakes to avoid

Key terms

greenhouse gas · acid rain · emission intensity · ozone layer