Step 4 of 10 · Worked example · TEACH

← Acids, Bases & pH

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Acids, Bases & pH · Step 4

Follow the worked example. At each stage, explain why the next step is justified.

A strong acid has pH 1.10. It is diluted by a factor of 100 (water self-ionisation can be ignored). Find the new pH.

A strong acid has pH 1.10. It is diluted by a factor of 100 (water self-ionisation can be ignored).

Find the new pH.

Read it once, slowly. Then copy it onto your page.
  • What is fixed? A strong acid, fully dissociated, at pH 1.10. No concentration is given: only the pH.
  • What happens? Diluted by a factor of 100: water is added until the volume is 100 times bigger.
  • Ignore water self-ionisation: the H⁺ that pure water makes itself is too little to count here.
  • What do they want? The new pH, to 2 decimal places like the one given.
Céim

Higher Level Chemistry · Acids, Bases & pH · Step 4 of 10

The pH scale

pH is the negative logarithm of the hydrogen-ion concentration, so each unit of pH is a tenfold change in [H⁺].

Why it matters

pH questions test the log scale: a tenfold dilution raises pH by one, and a pH difference of 2 means a hundredfold difference in [H⁺].

The worked example

A strong acid has pH 1.10. It is diluted by a factor of 100 (water self-ionisation can be ignored). Find the new pH.

How the worked example goes

  1. Read

    • What is fixed? A strong acid, fully dissociated, at pH 1.10. No concentration is given: only the pH.
    • What happens? Diluted by a factor of 100: water is added until the volume is 100 times bigger.
    • Ignore water self-ionisation: the H⁺ that pure water makes itself is too little to count here.
  2. Understand

    • What happens to the H⁺ when I add water?
    • No H⁺ is made or lost. The same H⁺ ions spread through 100 times the volume.
    • So the H⁺ concentration, [H⁺], becomes 100 times smaller.
  3. Reduce

    • [H⁺] ÷ 100. So the pH changes by… Up by 2: 100 = 10², and log 100 = 2. Less H⁺ means less acidic, so the pH goes up by 2.
    • Which rule do I use?
    • Write the dilution factor as a power of ten. Its log is the change in pH.
  4. Solve

    • Work it out.
    • 100 = 10², so log 100 = 2
    • new pH = 1.10 + 2
  5. Check

    • Is it right?
    • Second route: go through [H⁺] in mol L⁻¹, then back to pH.
    • before: [H⁺] = 10⁻¹·¹⁰ = 0.0794

Common mistakes to avoid

Key terms

pH · logarithmic scale · dilution factor · pH meter