Step 7 of 10 · Worked example · TEACH

← Acids, Bases & pH

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Acids, Bases & pH · Step 7

Follow the worked example. At each stage, explain why the next step is justified.

A weak monoprotic acid has concentration 0.200 mol L⁻¹ and Kₐ = 1.00 × 10⁻⁵. Ignoring water ionisation and using the small-dissociation model, calculate the pH and check the 5% criterion.

A weak monoprotic acid has concentration 0.200 mol L⁻¹ and Ka = 1.00 × 10⁻⁵. Ignoring water ionisation and using the small-dissociation model, calculate the pH and check the 5% criterion.

Read it once, slowly. Then copy it onto your page.
  • What is fixed? A weak monoprotic acid, HA: one H⁺ per molecule, given up only partly. 0.200 mol L⁻¹ of it was dissolved: call that C.
  • And Ka = 1.00 × 10⁻⁵ mol L⁻¹. Tiny: very little of the acid splits.
  • The small-dissociation model: so little splits that the HA left is almost all of the 0.200 we started with.
  • What do they want? The pH, then the 5% check: is under 5% of the acid split, so the model was fair?
Céim

Higher Level Chemistry · Acids, Bases & pH · Step 7 of 10

pH of weak acids

For a weak acid that dissociates only slightly, [H⁺] ≈ √(Kₐ × C), because [HA] at equilibrium is almost equal to its starting concentration.

Why it matters

Weak-acid pH is a standard calculation question, and examiners also expect you to check that the small-dissociation approximation holds.

The worked example

A weak monoprotic acid has concentration 0.200 mol L⁻¹ and Ka = 1.00 × 10⁻⁵. Ignoring water ionisation and using the small-dissociation model, calculate the pH and check the 5% criterion.

How the worked example goes

  1. Read

    • What is fixed? A weak monoprotic acid, HA: one H⁺ per molecule, given up only partly. 0.200 mol L⁻¹ of it was dissolved: call that C.
    • And Ka = 1.00 × 10⁻⁵ mol L⁻¹. Tiny: very little of the acid splits.
    • The small-dissociation model: so little splits that the HA left is almost all of the 0.200 we started with.
  2. Understand

    • Why isn't [H⁺] just 0.200?
    • For a strong acid it would be: every molecule gives its H⁺. A weak acid holds on to most of its H⁺.
    • Trap: treat it as fully dissociated and you get pH = −log(0.200) = 0.70. Far too acidic.
  3. Reduce

    • Which steps, in which order?
    • Three lines of working, each feeding the next: [H⁺], then pH, then the percentage that split.
    • [H⁺] = √(Ka × C)
  4. Solve

    • Ka × C = 1.00 × 10⁻⁵ × 0.200 = 2.00 × 10⁻⁶. So [H⁺] = ? 1.41 × 10⁻³ mol L⁻¹: √(2.00 × 10⁻⁶) = 1.414 × 10⁻³ mol L⁻¹.
    • Find [H⁺], then the pH.
    • Ka × C = 1.00 × 10⁻⁵ × 0.200 = 2.00 × 10⁻⁶
  5. Check

    • Is it right?
    • Reverse it: [H⁺]² ÷ C should give back Ka.
    • (1.414 × 10⁻³)² ÷ 0.200 = 1.00 × 10⁻⁵ = Ka ✓

Key terms

weak acid · small-dissociation approximation · percentage dissociation · K_w