Step 10 of 16 · Worked example · TEACH

← Calculus

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Calculus · Step 10

Solve f′(x) = 0, then use f″(x) to classify each point.

Find and classify the stationary points of f(x) = x³ − 3x² − 9x + 5.

Sign of f′(x) = 3(x − 3)(x + 1)

+
−
+
-3x = −1 (max)x = 3 (min)5
  • + · f increasing
  • − · f decreasing
  • + · f increasing
Positive, negative, positive — rise, fall, rise.

Find and classify the stationary points of the function f(x) = x³ − 3x² − 9x + 5.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A cubic, f(x) = x³ − 3x² − 9x + 5: highest power 3, with a +1 in front.
  • First job: find the stationary points. Each is a point, so it needs both coordinates, (x, y), not just x.
  • Second job: classify each one: say whether it is a maximum or a minimum.
Céim

Higher Level Maths · Calculus · Step 10 of 16

Increasing, Decreasing, Stationary Points & Second Derivative

The sign of the first derivative says whether a function rises or falls; the second derivative classifies the flat points.

Why it matters

It converts a bare equation into a description of behaviour, which is what sketching and optimisation both need.

The worked example

Find and classify the stationary points of the function f(x) = x³ − 3x² − 9x + 5.

How the worked example goes

  1. Read

    • What is going on? A cubic, f(x) = x³ − 3x² − 9x + 5: highest power 3, with a +1 in front.
    • First job: find the stationary points. Each is a point, so it needs both coordinates, (x, y), not just x.
    • Second job: classify each one: say whether it is a maximum or a minimum.
  2. Understand

    • How do I picture it?
    • The curve climbs to a hump, falls into a dip, then climbs again.
    • At the top of the hump and the bottom of the dip, the curve is flat for an instant. Stationary means exactly that: slope 0, so f′(x) = 0.
  3. Reduce

    • Where do I start? Which equation finds the x-values of the stationary points? f′(x) = 0: Stationary means the slope is 0, and the slope is f′(x).
    • What is the plan?
    • 1. Differentiate: f′(x).
  4. Solve

    • Where is the slope 0?
    • f′(x) = 3x² − 6x − 9
    • 3x² − 6x − 9 = 0
  5. Check

    • Is it right?
    • Both points flat?
    • f′(−1) = 3 + 6 − 9 = 0 ✓

Common mistakes to avoid

Key terms

stationary point · turning point · local maximum · local minimum · concavity · point of inflection