Step 7 of 10 · Worked example · TEACH

← Work, Energy, Elasticity & Circular Motion

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Applied Maths · Work, Energy, Elasticity & Circular Motion · Step 7

Follow the worked example and explain why each modelling and calculation step is valid.

A Hookean spring has stiffness 120 N/m and extension 1/50 m within its elastic range. Find stored elastic energy.

A Hookean spring has stiffness 120 N/m and extension 0.02 m.

It stays within its elastic range. Find the stored elastic energy.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A spring is stretched. It is Hookean and within its elastic range, so F = k x holds the whole way.
  • What is given? k = 120 N/m and x = 0.02 m: a stretch of 2 cm, already in metres.
  • What do they want? The stored elastic energy E: the work done stretching it, now held in the spring, in joules.
Céim

Higher Level Applied Maths · Work, Energy, Elasticity & Circular Motion · Step 7 of 10

Elastic Potential Energy

The work done deforming a Hookean spring is stored as elastic potential energy, equal to the area under its force–extension graph.

Why it matters

In exam energy problems, accounting for the changing spring force avoids a factor-of-two error.

The worked example

A Hookean spring has stiffness 120 N/m and extension 0.02 m. It stays within its elastic range. Find the stored elastic energy.

How the worked example goes

  1. Read

    • What is going on? A spring is stretched. It is Hookean and within its elastic range, so F = k x holds the whole way.
    • What is given? k = 120 N/m and x = 0.02 m: a stretch of 2 cm, already in metres.
    • What do they want? The stored elastic energy E: the work done stretching it, now held in the spring, in joules.
  2. Understand

    • How hard is it pulled?
    • At the full 0.02 m stretch, the force is k x = 120 × 0.02 = 2.4 N. At the very start, with no stretch, it is 0 N.
    • So the work is not simply 2.4 × 0.02 = 0.048 J. That would need 2.4 N the whole way, and the force starts at 0.
  3. Reduce

    • Which gives the stored energy E? E = ½k x²: The area under the straight line is a triangle: ½ × x × kx = ½kx².
    • Where do I start?
    • Use E = ½k x². k is in N/m, so x must be in metres: 0.02, not 2.
  4. Solve

    • Square first, then multiply.
    • E = ½k x²
    • E = ½(120)(0.02)²
  5. Check

    • Is it right?
    • Average force: (0 + 2.4) ÷ 2 = 1.2 N, over 0.02 m: 1.2 × 0.02 = 0.024 J ✓
    • Half the rectangle: 0.048 ÷ 2 = 0.024 J ✓

Common mistakes to avoid