Step 9 of 10 · Worked example · TEACH

← Differential Equations & Continuous Change

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Applied Maths · Differential Equations & Continuous Change · Step 9

Follow the worked example and explain why each modelling and calculation step is valid.

A falling body is modelled by m dv/dt=mg−kv, downward positive, with m=4 kg, k=3 kg/s and g=10 m/s². Find its terminal speed.

A falling body is modelled by m dv/dt = mg − kv, downward positive, with m = 4 kg, k = 3 kg/s and g = 10 m/s².

Find its terminal speed.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A body falls. m dv/dt = mg − kv is Newton's second law: mass × acceleration = weight down minus resistance up. Down is +.
  • What is given? m = 4 kg, k = 3 kg/s and g = 10 m/s². Use 10, as the question says, not 9.8.
  • What do they want? The terminal speed: the steady speed the body settles at as it keeps falling. In m/s.
Céim

Higher Level Applied Maths · Differential Equations & Continuous Change · Step 9 of 10

Variable Force & Acceleration Models

Newton's second law gives a differential equation when force depends on velocity.

Why it matters

A variable drag force changes the acceleration, so constant-acceleration formulae cannot describe the whole motion.

The worked example

A falling body is modelled by m dv/dt = mg − kv, downward positive, with m = 4 kg, k = 3 kg/s and g = 10 m/s². Find its terminal speed.

How the worked example goes

  1. Read

    • What is going on? A body falls. m dv/dt = mg − kv is Newton's second law: mass × acceleration = weight down minus resistance up. Down is +.
    • What is given? m = 4 kg, k = 3 kg/s and g = 10 m/s². Use 10, as the question says, not 9.8.
    • What do they want? The terminal speed: the steady speed the body settles at as it keeps falling. In m/s.
  2. Understand

    • How do I picture it?
    • Two forces. The weight mg = 4 × 10 = 40 N pulls down, always the same. The resistance kv pushes up, and grows with the speed.
    • Speed → resultant 40 − 3v → a = resultant ÷ 4
  3. Reduce

    • Terminal speed means which condition? (dv)/(dt) = 0: The velocity stops changing, so the acceleration is 0 and mg = kv.
    • Set the acceleration to 0.
    • m (dv)/(dt) = m g − k v
  4. Solve

    • Solve for v.
    • Move the resistance to the other side, then divide by k = 3. Trap: dividing the other way, 3 ÷ 40.
    • 0 = 4 × 10 − 3v
  5. Check

    • Is it right?
    • Forces at v = (40)/(3): resistance 3 × (40)/(3) = 40 N, weight 40 N. They balance ✓
    • Units: N ÷ kg/s = kg m/s² ÷ kg/s = m/s ✓