Step 5 of 10 · Worked example · TEACH

← Differential Equations & Continuous Change

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Applied Maths · Differential Equations & Continuous Change · Step 5

Follow the worked example and explain why each modelling and calculation step is valid.

For d²x/dt²=−(1/10) × (dx/dt), initial velocity dx/dt at t=0 is 11. Set v=dx/dt and find v(3).

For d²x/dt² = −(1/10)(dx/dt), the initial velocity dx/dt at t = 0 is 11.

Set v = dx/dt and find v(3).

Read it once, slowly. Then copy it onto your page.
  • What is going on? A body moves along a line. x is its position, dxdt its velocity, d²xdt² its acceleration. Acceleration = −0.1 × velocity.
  • What is fixed? At the start, the velocity is 11. No units are given, so the answer has none.
  • What do they want? They tell us how to start: let v = dx/dt. Then find v(3), the velocity when t = 3.
Céim

Higher Level Applied Maths · Differential Equations & Continuous Change · Step 5 of 10

Second-Order Equations Reducible to First Order

When a second-order motion equation involves velocity but not position, setting v = dx/dt can reduce it to a first-order equation.

Why it matters

Reducing the order lets you find velocity directly before integrating to obtain position if needed.

The worked example

For d²x/dt² = −(1/10)(dx/dt), the initial velocity dx/dt at t = 0 is 11. Set v = dx/dt and find v(3).

How the worked example goes

  1. Read

    • What is going on? A body moves along a line. x is its position, (dx)/(dt) its velocity, (d²x)/(dt²) its acceleration. Acceleration = −0.1 × velocity.
    • What is fixed? At the start, the velocity is 11. No units are given, so the answer has none.
    • What do they want? They tell us how to start: let v = dx/dt. Then find v(3), the velocity when t = 3.
  2. Understand

    • How do I picture it?
    • At the start the velocity is 11, so the acceleration is −0.1 × 11 = −1.1: the body is slowing down. The minus sign means it acts against the motion, like a resistance.
    • As the body slows, the braking gets gentler too. Hold the start braking for 3 units: 11 − 3.3 = 7.7. The real braking eases, so v(3) is more than 7.7, and less than 11.
  3. Reduce

    • Let v = (dx)/(dt). Then (d²x)/(dt²) = ? (dv)/(dt): d²x/dt² means differentiate x twice. Once gives v; once more gives dv/dt.
    • Now it is first order.
    • Replace (d²x)/(dt²) by (dv)/(dt) and (dx)/(dt) by v. Then separate, as in Step 3.
  4. Solve

    • Integrate, then undo the ln.
    • ∫ (1)/(v) dv = ln|v|, and v > 0, so write ln v. One constant C is enough.
    • ln v = −0.1t + C
  5. Check

    • Is it right?
    • Differentiate v = 11e^−0.1t
    • (dv)/(dt) = −0.1 × 11e^−0.1t = −0.1v ✓