Step 8 of 10 · Worked example · TEACH

← Differential Equations & Continuous Change

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Applied Maths · Differential Equations & Continuous Change · Step 8

Follow the worked example and explain why each modelling and calculation step is valid.

An object cools in a 20°C room with T'=−0.1(T−20) and T(0)=60°C (t in minutes). Solve the model and find the time for its excess above room temperature to halve. Relate the same exponential idea to growth and decay.

An object cools in a 20 °C room with T′ = −0.1(T − 20) and T(0) = 60 °C (t in minutes).

Solve the model and find the time for its excess above room temperature to halve.

Relate the same exponential idea to growth and decay.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A hot object, 60 °C at the start, cools in a room at 20 °C. Time is in minutes.
  • What is the law? T′ = −0.1(T − 20): how fast it cools depends on how much hotter than the room it is, T − 20. That gap is the excess.
  • What do they want? Solve the model: T as a formula in t. Then when the excess is half its start value: a time, in minutes.
  • And last: link this to growth and decay: say what the cooling has in common with them.
Céim

Higher Level Applied Maths · Differential Equations & Continuous Change · Step 8 of 10

Growth, Decay, Cooling & Continuous Interest

A rate proportional to the current quantity produces exponential change, with cooling governed by the excess above room temperature.

Why it matters

Identifying the quantity that drives the rate helps you choose a model whose predictions fit the physical or financial situation.

The worked example

An object cools in a 20 °C room with T′ = −0.1(T − 20) and T(0) = 60 °C (t in minutes). Solve the model and find the time for its excess above room temperature to halve. Relate the same exponential idea to growth and decay.

How the worked example goes

  1. Read

    • What is going on? A hot object, 60 °C at the start, cools in a room at 20 °C. Time is in minutes.
    • What is the law? T′ = −0.1(T − 20): how fast it cools depends on how much hotter than the room it is, T − 20. That gap is the excess.
    • What do they want? Solve the model: T as a formula in t. Then when the excess is half its start value: a time, in minutes.
  2. Understand

    • How do I picture it?
    • At the start the excess is 60 − 20 = 40 °C, so T′ = −0.1 × 40 = −4: it cools at 4 °C a minute.
    • When the excess is down to 20 °C, it cools at only 2 °C a minute. Hot things cool fast; nearly-room-temperature things cool slowly.
  3. Reduce

    • Where do I start?
    • z′ = −0.1z is separable: z with dz, t with dt. The object starts hotter than the room, so z > 0 and dividing by it is safe.
    • Then change back with T = 20 + z, and set the excess equal to half of 40, which is 20.
  4. Solve

    • Separate and integrate.
    • Undo the ln with C = eᶜ, a positive constant. The start excess, 40, then fixes C.
    • (dz)/(z) = −0.1 dt
  5. Check

    • Is it right?
    • T(0) = 20 + 40e⁰ = 60 ✓
    • T′ = −4e^−0.1t