Step 3 of 10 · Worked example · TEACH

← Differential Equations & Continuous Change

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Applied Maths · Differential Equations & Continuous Change · Step 3

Follow the worked example and explain why each modelling and calculation step is valid.

Solve dy/dt=(1/10) × y with y(0)=11>0 and find y(3). Show the separation and initial-condition step.

Solve dy/dt = (1/10)y, with y(0) = 11 > 0, and find y(3).

Show the separation and the initial condition step.

Read it once, slowly. Then copy it onto your page.
  • What is going on? dy/dt = (1/10)y: y changes at a rate of one tenth of its own size. As a decimal, 110 = 0.1.
  • What is fixed? The start: y = 11 when t = 0. So y starts positive. No units are given, so the answer has none.
  • What do they want? Solve: a formula for y in terms of t. Then y(3): its value when t = 3.
  • What must I show? Two steps on the page: the separation and where y(0) = 11 goes in. Marks are on them.
Céim

Higher Level Applied Maths · Differential Equations & Continuous Change · Step 3 of 10

First-Order Separable Differential Equations

A first-order separable differential equation can be solved by collecting the y terms with dy and the t terms with dt, then integrating.

Why it matters

Separation turns a rate equation into a solution, but dividing by a factor can hide equilibrium solutions that must be checked separately.

The worked example

Solve dy/dt = (1/10)y, with y(0) = 11 > 0, and find y(3). Show the separation and the initial condition step.

How the worked example goes

  1. Read

    • What is going on? dy/dt = (1/10)y: y changes at a rate of one tenth of its own size. As a decimal, (1)/(10) = 0.1.
    • What is fixed? The start: y = 11 when t = 0. So y starts positive. No units are given, so the answer has none.
    • What do they want? Solve: a formula for y in terms of t. Then y(3): its value when t = 3.
  2. Understand

    • How do I picture it?
    • At the start y = 11, so it rises at 0.1 × 11 = 1.1 per unit of time. Once it reaches 12, it rises at 1.2.
    • Try holding the start rate: 1.1 for 3 units adds 3.3, giving 14.3. But the rate keeps growing, so y(3) is more than 14.3.
  3. Reduce

    • Separate the variables. Which line is right? (dy)/(y) = (1)/(10) dt: Divide both sides by y and multiply by dt. All y on the left with dy, all t on the right with dt.
    • Separate.
    • (dy)/(dt) = (1)/(10)y
  4. Solve

    • Integrate, then undo the ln.
    • ∫ (1)/(y) dy = ln|y|, and y > 0, so we write ln y. One C covers both sides.
    • ln y = 0.1t + C
  5. Check

    • Is it right?
    • Differentiate y = 11e^0.1t
    • (dy)/(dt) = 0.1 × 11e^0.1t = (1)/(10)y ✓